home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CICA 1993 April
/
CICA MS Windows - April 1993.iso
/
unzipped
/
winword
/
symbol
/
symbol.txt
Wrap
Text File
|
1990-06-10
|
1KB
|
26 lines
#: 33409 S12/Word for Windows
28-May-90 00:20:05
Sb: #33374-Windows 3.0 & W for W
Fm: Doug Timpe, Microsoft 75140,427
To: Charles Edwards 73300,3044
1. Get your CONVERSIONS disk if you're using 5 1/4" disks,
your SETUP disk if you're using 720K disks.
2. Make a C:\SYMBOL (or whatever drive you want) directory. Copy the files
from the \SYMBOL directory off of the floppy into this directory.
3. Copy the SFINSTAL.DIR file from the *root* of your floppy (not the
\SYMBOL directory) to the root of drive C: (or whatever).
4. Copy the contents of SYMBOL.W3 into the C:\SYMBOL directory (it will
overwrite all of the .PFM files -- the incoming ones are intended for
Win 3.0, the overwritten ones were for Win 2.xx.)
5. Run the Control Panel. Double click Printers. A dialog box will appear.
Click Configure. Another dialog box will appear. Click Setup. Another
dialog box will appear. Click Fonts. Another dialog box will appear.
Click Add Fonts. A message box will appear. Type in C:\
<Return>. The fonts should show up as Symbol in various point sizes
on the right. Select them all and copy them over. Make sure a PCLFONTS
directory is specified, OK, and then you should be all set.
Doug Timpe, Winword Development Team